Programmable 6-Syringe Pump

  • Model: NE-1600

Description

The NE-1600 Programmable 6 Channel Syringe Pump series holds two, four, or six syringes (up to 60mL each). Infusion rates range from 0.452uL/hr (1mL syringe) to 1451mL/hr (60mL syringe). The chassis is only 5 3/4" x 8 3/4" and features an easy-to-use keypad interface.

Key features of the NE-1600 include:

  • Fully programmable and automatable
  • Operates via keypad or software
  • Infusion and withdrawal
  • Set a single pumping rate and/or dispensing volume
  • Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, and sound the buzzer
  • Network, control, and monitor up to 100 pumps with one computer
  • Motor stall detection
  • Dispensing accuracy of +/- 1%
  • Technical support
  • Two year warranty

Details

The NE-1600 series pumps are available as a Continuous Infusion (Push-Pull) and Dual Syringe Pump system, in which two NE-1600 pumps are connected by a cable, allowing one pump to infuse while the other pump refills or simultaneously infuses.

Maximum syringe size note: 
Although a maximum of a 60mL syringe is specified, the pump can hold up to a 140mL syringe but can only open up to about 120mL lengthwise

Specifications

Sample Flow Rates

Syringe Size (mL)
Max Rate (mL/hr)
Min Rate (mL/hr)
0.5
16.66
0.001
1
34.69
0.73
3
125.7
2.646
5
265.4
5.581
10
392
8.244
20
637.6
13.41
30
838
17.63
60
1385
29.13

Accessories

Firmware upgrades:

  • FW-1-X Upgrade: Linear/ gradient flow rate ramping and additional programming capabilities
  • FW-1-X2 Upgrade: Linear/ gradient flow rate ramping and additional programming capabilities, up to 340 pumping phases, and max RS-232 baud rate of 38,400

Ordering

Part# Description
NE-1600 Programmable 6 Channel Syringe Pump
DUAL-NE-1600 Continuous Infusion/ Dual Programmable 6 Channel Syringe Pump System
FW-1-X X Firmware upgrade for NE-1600 syringe pumps
FW-1-X2 X2 Firmware upgrade for NE-1600 syringe pumps