TEC-10CX

TEC Family

Description

TEC-10CX – Two-Electrode Voltage Clamp Amplifier for sophisticated recordings from oocytes

Features:

  • Sophisticated and extremely fast two-electrode voltage and current clamp (V/C) amplifier with PI-controller for recordings from oocytes
  • Push buttons for comfortable and fast selection of MODE of OPERATION
  • Differential potential registration and high-voltage current source output, automated electrode resistance test mode which can be used even with the electrodes impaled in an oocyte
  • VC OUTPUT LIMITER, COMMAND FILTER, INTEGRATOR and SERIES RESISTANCE COMPENSATION for fine tuning of VC circuit
  • Current transient compensation prevents data acquisition system from clipping
  • Digital DISPLAYS for current, voltage and electrode resistance
  • Four-pole BESSEL filter for current
  • No virtual ground needed for recording membrane currents
  • OSCILLATION SHUT-OFF unit prevents cells from damage
  • Standard current range is ±150 µA into 1 MOhm. Current headstages with selectable current ranges (x0.1, x1, x2, x5 or x0.1, x0.2, x0.5, x1) are also available
  • Easy operation with all major data acquisition systems, remote selection of MODE of OPERATION, telegraphing (monitoring) outputs for current sensitivity and filter

Features

Feature TEC-03X TEC-05X TEC-10CX
VC-Error display X X
PI-Controller X X X
Series Resistance Compensation X X X
Electrode Resistance Test X X X
Mode of Operation Switch Rotary switch Rotary switch Push buttons
Bridge Mode X
DHC mode opt.
Lowpass filter: 20 … 20 kHz Two-Pole BESSEL
(opt. Four-Pole)
Two-Pole BESSEL
(opt. Four-Pole)
Four-Pole BESSEL
Direct Current output from Headstage X X X
Oscillation Shut-off X X X
Transient Compensation X
Capacity Compensation X X X
Cap. Comp. of Current Headstage X
Slow Mode: VCcCC
(Sutor et al., 2003)
opt.
Please note:
These are the available standard configurations.
If you have special requirements,
please contact us directly.

Ordering

Part no. Description
TEC-10CX TEC-10CX Oocyte Clamp with Digital Filter, Gain & Transient Compensation
TEC-10X TEC-10CX Oocyte Clamp without Transient Compensation, with Digital Filter, Gain
TEC-10(C)X-BF TEC-10(C)X-BF Oocyte Amplifier with fourpole BESSEL filter
TEC-10(C)X-BF-CW TEC-10(C)X-BF Oocyte Amplifier with fourpole BESSEL filter and built-in interface for CellWorks software
TEC-10(C)X-CW TEC-10(C)X with built-in interface for CellWorks software
TEC-EH PPH-0P-BNC Microelectrode Holder 1.5 mm glass, w/o. port, w. BNC connector
TEC-EH-SET Electrode Holder Set for TEC Amplifiers
TEC-MOD Passive Cell Model for TEC Systems
TEC-MODA Cell Model with Active Membrane Resistance for TEC systems
TEC-CON SubClic Cable for TEC Headstage
TEC-CHS-4 Current Headstage with four Ranges x0.1,x1,x2,x5
TEC-RS-R Additional system for measuring series resistance in Oocytes

Downloads

Manuals:
TEC-03X Manual
TEC-05X Manual
TEC-10CX Manual

TEC Cell Model Manual
TEC-RS Cell Model Manual

Brochure:
TEC Brochure

HOWTO…

References:
TEC Reference List
TEC-03X Reference List
TEC-05X Reference List
TEC-10CX Reference List