Description
EPMS-07:
- The EPMS-07 is a modular system for measuring and/or processing of bioelectrical signals in electrophysiology and the application of substances in pharmacology.
- The system is housed in a 19″ rackmount cabinet (3U) containing a power supply and has room for up to 7 plug-in units depending on the width of a module.
- Modules can have a width of 1, 1.5, 2 or 3. The width of the modules in detail is given in the “Options” field for each module. The sum for one 19″ cabinet must not exceed seven.
- The plug-in units are connected to mains by a bus at the rear panel.
EPMS-H-07:
- In addition to the standard power supply of the EPMS-07, the EPMS-H-07 has a built-in high voltage power supply. This is necessary for all MVCS / MVCC modules, the HVA-100, HV-TR150 and HVC-03M modules. The output voltage depends on the modules in use.
EPMS-E-07:
- Is used with an external power supply (PWR-03D, to be ordered separately).
EPMS-03:
- The EPMS-03 is a modular system for measuring and/or processing of bioelectrical signals in electrophysiology and the application of substances in pharmacology.
- The system is housed in a housing containing a power supply and has room for up to 3 plug-in units depending on the width of a module.
- The plug-in units are connected to mains by a bus at the rear panel.
Last Updated on March 20, 2024
PWR-03D
Power supply for EMPS-E-07 or EXT-16DX systems
The external power supply PWR-03D is capable of driving up to three EPMS-E housings or one
EXT-16DX amplifier with one R/I-T1DX. Each housing is connected by a 6-pole cable from one
of three connectors on the front panel of the PWR-03D to the rear panel of the respective
EPMS-E or EXT-16DX / R/I-T1DX housing.
For more information, download the PWR-03D user manual.
Last Updated on March 20, 2024
Specifications
DIMENSIONS:
19” rackmount cabinet, for up to 7 plug-in units
Dimensions: 133.4 mm (3U) high (1U=1 3/4” = 44.45 mm), 302 mm deep
EPMS-07:
Power supply: 115/230 Volts AC, 60/50 Hz, fuse 2/1 A slow, 45-60 W (depending on the modules plugged in)
EPMS-E-07:
External power supply (for EPMS-E): 115/230 Volts AC, 60/50 Hz, fuse 1.6/0.8 A, slow
Dimensions of External power supply: (W x D x H) 225 mm x 210 mm x 85 mm
EPMS-03:
Desktop cabinet, for up to 3 plug-in units
Power supply: 115/230 Volts AC, 60/50 Hz, fuse 0.8 A / 0.4 A slow
Maximum current supply: 500 mA
Dimensions: 3U high (1U=1 3/4” = 44.45 mm), 254 mm deep, 265 mm wide
Last Updated on March 20, 2024
Downloads
Manual:
Extracellular amplifiers
EPMS Housing Brochure
Last Updated on March 20, 2024
Ordering
Part No. |
Description |
EPMS-07 |
With standard low-voltage power supply
suitable for all modules except MVCS, MVCC, HVC-03M and HVA-100 modules. |
EPMS-H-07 |
With low- and high-voltage power supply
required for MVCS, MVCC, HVC-03M and HVA-100 modules. |
EPMS-E-07 |
With external low-voltage low-noise power supply (PWR-03D, to be ordered separately). |
EPMS-03 |
1/2 19″ cabinet with low-voltage power supply for up to 3 units. |
PWR-03D |
Low-voltage low-noise power supply for up to 3 EPMS-E-07 housings. |
Last Updated on March 20, 2024