Overview
ISO-STIM 01M – Isolated Stimulator
Features:
- NO batteries needed
- ISOLATED OUTPUT
- Three input modes: ANALOG, GATE TTL, DIRECT
- Stimulus AMPLITUDE set by three digit control and a RANGE switch (CURRENT) or by an external source, e.g. a data acquisition system
- Stimulus duration set by two digit control from an internal, digital timer (10 ìs to 99 ms) or by an external source
- Stimulus polarity set by switch (+, 0, -) or by data acquisition system
- Current (±10 mA) or voltage (±100 V) source output
- “Overrange” and “active” LED indicators
- Capacitance compensation for the electrode capacitance
Combine with
- EXT-10C (extracellular amplifier module)
- DPA 2FX (amplifier / filter module)
- BA-01M (intracellular amplifier)
to get a complete system for stimulating, extracellular and intracellular recording.
Last Updated on March 20, 2024
Specifications
INPUT OPERATING MODES:
DIRECT, ANALOG TRIGGER, TTL TRIGGER, selectable with toggle switch
FUNCTION MODES:
voltage source, current source, selectable with toggle switch
SOURCE RANGES:
±10 mA (current source),
±100 V (voltage source), selectable with toggle switch
TIME RANGE FACTORS:
x10 µs, x100 µs, x1ms, selectable with toggle switch, time range up to 99 ms
AMPLITUDE POTENTIOMETER:
3 digits, ±10 V or ±10 mA max.,
polarity selectable with toggle switch
CURRENT RANGE FACTORS:
x0.1 µA, x1 µA, x10 µA,
selectable with toggle switch
TIME POTENTIOMETER:
2 digits, 0 – 99 as multiplication factor selectable
INPUT VOLTAGE RANGE:
±10 V, amplified internally with gain of 10 (voltage source) or gain of 1 (current source)
OUTPUT VOLTAGE:
±100 V max., isolated
OUTPUT CURRENT:
±10 mA max., isolated
Last Updated on March 20, 2024
Downloads
Manual:
ISO-Stim 01M Manual
Brochure:
ISO-Stim 01M Brochure
Last Updated on March 20, 2024
Ordering
| Part no. |
Description |
| ISO-STIM 01M-100 |
Stimulus isolation module (+/-100V, +/- 10 mA), with bipolar stimulus output, width = 2 |
| ISO-CAB |
Cable set for connecting the stimulation electrode |
Last Updated on March 20, 2024
