Overview
- low noise one channel heater
- small desktop cabinet
- heat only
- no thermometer
Last Updated on January 27, 2022
Desktop Power Supply for Heating Only
MPS-20
Details
The MPS-20 heating device is designed for heating purposes in electrophysiological experiments. It can be used in addition to npi temperature controllers such as MTC-20/2S, TC-10 etc. The MPS-20 system is housed in small desktop cabinet that can be placed close to the microscope, with built-in power supply and cooling elements for the power devices. The system guarantees low noise.
Each system incorporates a low-noise DC power supply with two digital displays for VOLTAGE and CURRENT and a set-point control with direct readout (0-100%). The output is connected to a high-power regulated stage (DC, continuous operation) for resistive loads. The power output is short circuit protected, the output power is limited electronically. Maximal output voltage is approximately 12 V, the current is limited to 1.5 A (peak).
The MPS-20 controller is delivered with a power cord and a user manual.
Last Updated on January 27, 2022
Ordering
| Part no. | Description |
| MPS-20 | One channel heater in desktop housing |
Last Updated on January 27, 2022
Specifications
DIGITAL DISPLAYS:
4 digits, XX.XX V (voltage at POWER OUTPUT) or 3 digits X.XX A (current at POWER OUTPUT)
POWER OUTPUT:
continuous: 12 V / 1.0 A, peak: 12 V / 1.5 A, short circuit protected
POWER REQUIREMENTS:
115 / 230V AC, 60 / 50 Hz,
DIMENSIONS:
desktop cabinet, 246 mm, 260 mm, 90 mm.
Last Updated on January 27, 2022
Downloads
Manual:
MPS-20 Manual
Brochure:
Temperature Control (general information)
Last Updated on January 27, 2022
