Description
The NE-4000 Programmable Double Syringe Pump series holds two syringes (up to 60mL each). Infusion rates range from 1.459uL/hr (1mL syringe) to 7635mL/hr (60mL syringe). The chassis is only 5 3/4″ x 8 3/4″ and features an easy-to-use keypad interface.
Key features of the NE-4000 include:
- Fully programmable and automatable
- Operates via keypad or software
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, and sound the buzzer
- Network, control, and monitor up to 100 pumps with one computer
- Motor stall detection
- Dispensing accuracy of +/- 1%
- Technical support
- Two year warranty
Last Updated on February 14, 2022
Details
The NE-4000 series pumps are available as a Continuous Infusion (Push-Pull) and Dual Syringe Pump system, in which two NE-4000 pumps are connected by a cable, allowing one pump to infuse while the other pump refills or simultaneously infuses.
Maximum syringe size note:
Although a maximum of a 60mL syringe is specified, the pump can hold up to a 140mL syringe but can only open up to about 120mL lengthwise
High pressure note:
The NE-4000 produces about 15 lbs (7.5 lbs per syringe) of linear force at top speed and about 100 lbs (50 lbs per syringe) at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi.
Last Updated on February 14, 2022
Specifications
Sample Flow Rates
Syringe Size (mL)
|
Max Rate (mL/hr)
|
Min Rate (mL/hr)
|
0.5
|
91.83
|
0.001
|
1
|
191.2
|
1.459
|
3
|
693.4
|
5.291
|
5
|
1462
|
11.17
|
10
|
2160
|
16.49
|
20
|
3514
|
26.82
|
30
|
4169
|
35.25
|
60
|
635
|
58.26
|
Last Updated on February 14, 2022
Ordering
Part# |
Description |
NE-4000 |
Programmable Double Syringe Pump |
DUAL-NE-4000 |
Continuous Infusion/ Dual Programmable Double Syringe Pump System |
FW-1-X |
X Firmware upgrade for NE-4000 series pumps |
FW-1-X2 |
X2 Firmware upgrade for NE-4000 series pumps |
Last Updated on February 14, 2022