HCPC-G
The HCPC-G, Heating Cooling Perfusion Cube G is designed to heat or cool a moving volume of liquid for use with a small cell chamber. The ideal flow rate is between 1.5 and 5ml/min. but flow can be as high as 10ml/min.
To get low temperatures it is advisable to use a water circulator to remove the heat from the device. ALA has the COOLIT circulator to perform this heat removal.
Last Updated on November 18, 2024
HCPC Features:
• small footprint
• polyimide output tip
• flow rates up to 10ml/min HCPC-G
• low adjustable internal volume
• flexible cable with DIN connector
• built-in temperature sensor in flow path
• compatible w/ALA HCT Controllers & npi PTC controllers
• internal wetted surface is ceramic coated
• low dead volume adjustable from 100-200μl
• fast temperature change at 1° C/sec
Last Updated on November 18, 2024
| Weight | Approx. 84g |
| L x W x H (without mounting rod) | 79 x 24 x 30mm |
| Internal volume | 150uL |
| in/out tube inside diameter | 1mm |
| Mounting Rod | 100 x 3.2mm |
| Max. flow rate | 10ml/min |
| Min. flow rate | 1 ml/min |
| Max. power | 28 W |
| Max. cooling | 20 W |
| Thermistor type | 2252Ω |
| Coolant flow requirement | No less than 300ml/min |
| Maximum Voltage | 12.0V |
| Max. Amps | 2.5A |
Last Updated on November 18, 2024
Last Updated on November 18, 2024
Optical Illumination System – PhotonMaker 
